DIESEL FUEL INJECTION · REMANUFACTURED & AFTERMARKET
Get a Quote
HomeInjector › 3155040
Injector 3155040
Injector 3155040 view 1
Remanufactured

Injector 3155040 for Volvo

Remanufactured injector, cross-ref 3155040, 8113409, D12c340. Bench-tested before shipment.

Cross-reference / interchange numbers

31550408113409D12C340D12C380D12C420BEBE4B12001BEBE4B12004
Condition
Remanufactured — not a genuine OEM new part
Warranty
12 months
Testing
Bench-tested: injection quantity, return flow, opening pressure, leakage
Application
Fits Volvo — D12c340, D12c380 3155040, 8113409, Bebe4b12001
Request a Quote

Quote within 24 hours. Send a photo of your nameplate and we will confirm the exact match.

About this part

3155040 is supplied as a remanufactured replacement injector. Cross-reference numbers: 3155040, 8113409, D12C340, D12C380, D12C420, BEBE4B12001, BEBE4B12004. Application recorded for this part: Fits Volvo — D12c340, D12c380 3155040, 8113409, Bebe4b12001. Fuel is delivered to this injector already pressurised by the rail. What it contributes is timing and atomisation — opening and closing within milliseconds, several times per combustion event on modern engines. Small changes in spray pattern or opening behaviour show up quickly as noise, smoke and rising consumption. What owners usually notice first: longer cranking, a rougher idle, more smoke than the engine used to produce, worse consumption, and occasionally a metallic knock that appears under load and clears once the engine is revved. Before replacing anything, distinguish injector faults from their look-alikes. Comparing return volume between cylinders and running a cut-out test on a diagnostic tool will show which cylinder is actually contributing — cheap checks that prevent replacing parts that were not faulty. Fitment notes: injectors on the same engine wear together. Replacing only the failed unit often leaves the others close behind, and a single new injector reading differently from its neighbours will cause exactly the rough running you were trying to fix. Replacing as a matched set avoids that. Always fit new copper sealing washers and seals — used washers rarely seal a second time — and where the system requires injector classification or IQA codes, have them programmed to the ECU after fitting. What we do differently: every core is stripped to components, inspected against wear limits and measured before anything is reused. Worn parts are replaced, not cleaned and refitted. After reassembly the unit is bench-tested — delivery, return flow, opening pressure and leakage — and only units inside specification are dispatched. We can send the test sheet for your order before it leaves. Every remanufactured unit carries a 12-month warranty.

Specifications

Part number3155040
ConditionRemanufactured (not a genuine OEM new part)
Cross-reference3155040, 8113409, D12C340, D12C380, D12C420, BEBE4B12001, BEBE4B12004
ApplicationFits Volvo — D12c340, D12c380 3155040, 8113409, Bebe4b12001
ProcessDisassembled, cleaned, measured, wear parts replaced, machined to specification
Bench testDelivery, return flow, opening pressure and leakage recorded before dispatch
Warranty12 months
Fitment note. Several part numbers in this family look similar. Confirm the number on your existing unit, the engine model and the machine or vehicle application before ordering. Send us a nameplate photo and we will verify the match before dispatch.
All manufacturer names, symbols and part numbers are used for identification and cross-reference purposes only. We are not an authorised distributor and are not affiliated with the original equipment manufacturer. Products offered are remanufactured or new aftermarket replacement parts unless stated otherwise.

More part numbers for Volvo

Related technical guides

Related part numbers