Remanufactured nozzle, cross-ref 0445116035, 03L130277C. Bench-tested before shipment.
Quote within 24 hours. Send a photo of your nameplate and we will confirm the exact match.
0445116035 is supplied as a remanufactured replacement nozzle. Cross-reference numbers: 0445116035, 03L130277C. Application recorded for this part: Transporter OEM. This part works at the sharp end of the injection system — high pressure, tight clearances, direct exposure to combustion heat. Nozzle condition governs how well fuel atomises, and therefore how much of it contributes to power rather than leaving as smoke. Watch for smoke on start-up, a rough idle that does not settle, wet or coked deposits around the tip, and consumption rising without any change in how the machine is worked. Have spray pattern and opening behaviour tested on a bench where possible. Combined with a leak-off comparison across the set, that separates a genuine nozzle fault from compression or timing problems. Cleanliness decides the outcome here. Work with the bore and seat scrupulously clean, fit new copper washers and seals, torque to specification, and check whether the engine needs injector coding after reassembly. What we do differently: every core is stripped to components, inspected against wear limits and measured before anything is reused. Worn parts are replaced, not cleaned and refitted. After reassembly the unit is bench-tested — delivery, return flow, opening pressure and leakage — and only units inside specification are dispatched. We can send the test sheet for your order before it leaves. Every remanufactured unit carries a 12-month warranty.
| Part number | 0445116035 |
| Condition | Remanufactured (not a genuine OEM new part) |
| Cross-reference | 0445116035, 03L130277C |
| Application | Transporter OEM |
| Process | Disassembled, cleaned, measured, wear parts replaced, machined to specification |
| Bench test | Delivery, return flow, opening pressure and leakage recorded before dispatch |
| Warranty | 12 months |
