DIESEL FUEL INJECTION · REMANUFACTURED & AFTERMARKET
Get a Quote
HomeFuel Pump › 0445020506
Fuel Injection Pump 0445020506
Fuel Injection Pump 0445020506 view 1
Remanufactured

Fuel Injection Pump 0445020506 for Mitsubishi

Remanufactured fuel injection pump, cross-ref 0445020506, 32K6500010, 32K65-00010. Bench-tested before shipment.

Cross-reference / interchange numbers

044502050632K650001032K65-00010
Condition
Remanufactured — not a genuine OEM new part
Warranty
12 months
Testing
Bench-tested: injection quantity, return flow, opening pressure, leakage
Application
Fits Mitsubishi — CP4 0445020506, 0 445 020 506, 32K6500010, 32K65-00010
Request a Quote

Quote within 24 hours. Send a photo of your nameplate and we will confirm the exact match.

About this part

0445020506 is supplied as a remanufactured replacement fuel injection pump. Cross-reference numbers: 0445020506, 32K6500010, 32K65-00010. Application recorded for this part: Fits Mitsubishi — CP4 0445020506, 0 445 020 506, 32K6500010, 32K65-00010. Every injection event depends on this pump producing pressure at exactly the right moment. Because it also carries its own lubrication, poor supply pressure and fuel dilution do disproportionate damage — which is why the supply side should always be checked alongside the pump itself. Look for extended cranking, especially hot, poor throttle response, smoke across the rev range, fluctuating idle speed, and a gradual rise in consumption that cannot be explained by duty cycle. Eliminate the cheap causes first: filter condition, lift pump output, suction-side air leaks, fuel quality. Only then have delivery quantity and timing tested before committing to a replacement unit. Fitting notes: timing is everything here. Set the pump against the engine's timing marks rather than forcing anything, prime thoroughly before cranking, and check that the lift pump is delivering adequate supply pressure. Also replace the mounting seal and confirm there is no air left in the system before the first start. Rebuilt rather than refurbished: full teardown and measurement, worn components replaced instead of cleaned and reused, sealing surfaces restored to specification, then bench calibration and testing. The record is what separates this from a used part — we can provide the test sheet for your order. Covered by a 12-month warranty.

Specifications

Part number0445020506
ConditionRemanufactured (not a genuine OEM new part)
Cross-reference0445020506, 32K6500010, 32K65-00010
ApplicationFits Mitsubishi — CP4 0445020506, 0 445 020 506, 32K6500010, 32K65-00010
ProcessDisassembled, cleaned, measured, wear parts replaced, machined to specification
Bench testDelivery, return flow, opening pressure and leakage recorded before dispatch
Warranty12 months
Fitment note. Several part numbers in this family look similar. Confirm the number on your existing unit, the engine model and the machine or vehicle application before ordering. Send us a nameplate photo and we will verify the match before dispatch.
All manufacturer names, symbols and part numbers are used for identification and cross-reference purposes only. We are not an authorised distributor and are not affiliated with the original equipment manufacturer. Products offered are remanufactured or new aftermarket replacement parts unless stated otherwise.

More part numbers for Mitsubishi

Related technical guides

Related part numbers